I need a demo hex file for programming a microcontroller I have by the same number to make sure that the control or screen is damaged
Linkback: Ynt: Delta Pulse 3S

Hi friends
in the last PCB I didn't get the 7v.
please what mean ?

Hi all
in the last PCB Q4 is BC546 or 2N7000 ?

Alıntı yapılan: brave - 30 Ocak 2018, 02:28:30

Hi friends
in the last PCB I didn't get the 7v.
please what mean ?

finally I found these voltages :
5.02 and 6.18 is it good ?
and I have question : Q4 is BC546 or 2N7000?

My brother thought they did not like us help here

Alıntı yapılan: حسين رشاد - 30 Ocak 2018, 05:32:39
My brother thought they did not like us help here

People are working... Not waiting here for give to anyone response... When will be available, will give response to you or others. If you will make like this, you can not take any response...

Finally... I am not giving demo file...

Alıntı yapılan: brave - 30 Ocak 2018, 02:42:28
Hi all
in the last PCB Q4 is BC546 or 2N7000 ?

you can use 2n7000

Alıntı yapılan: Karadağ - 30 Ocak 2018, 09:26:11

Alıntı yapılan: brave - 30 Ocak 2018, 02:42:28
Hi all
in the last PCB Q4 is BC546 or 2N7000 ?

you can use 2n7000

thank you,  Karadağ.
how about the voltage.I found : 5v and 6,18v.

Alıntı yapılan: brave - 30 Ocak 2018, 12:35:44

Alıntı yapılan: Karadağ - 30 Ocak 2018, 09:26:11

Alıntı yapılan: brave - 30 Ocak 2018, 02:42:28
Hi all
in the last PCB Q4 is BC546 or 2N7000 ?

you can use 2n7000

thank you,  Karadağ.
how about the voltage.I found : 5v and 6,18v.

This is normal

ok, thank you Karadağ

My brother all works I am the first copy I make it like other and need to help him to know how to operate the device as it needs to be accurate in the file to work without problems, but after running it put down the button down remains working and the heater is heated and this is a problem of the controller and now the machine does not work final Need for the hex file demo to set the device and make sure From the board Rittma brought another controller of the company need for a month to arrive and do not want to burn the other

Hello all
I try to calibrate the square bobine, but I got this curve.
For information. I tried the device in my house and the house contains iron as well as electrical equipment.
other thing, I could not access the menu.

Sorry I forgot to upload the image of curve.
this is my curve

Alıntı yapılan: brave - 30 Ocak 2018, 17:44:18

Sorry I forgot to upload the image of curve.
this is my curve

This isnot true. You should make a good adjustment.

Can I adjust in the home ?

No. You must adjust it outside.

Alıntı yapılan: Karadağ - 30 Ocak 2018, 18:29:52
No. You must adjust it outside.

ok, thank you

Hello
my device enter always to the curve of calibration.
please tell me how to exceed this curve and enter to the menu.

Checking the keyboard entries There is an electric circuit if you do not find the controller to be damaged

[color=rgba(0, 0, 0, 0.870588)]I think it's a monumental process from the company selling microcontrollers with its own problems where I collected Burden and the same problem knowing that I did not use the Kaui welding and control existing[/color]