Gönderen Konu: Delta Pulse 3S  (Okunma sayısı 9922739 defa)

0 Üye ve 40 Ziyaretçi konuyu incelemekte.

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9260 : 18 Ocak 2018, 01:45:04 »
  • My brother currently has a hex file v6.1 what is the board that works with this version without problems attached to my file board

Çevrimdışı onur600

  • Albay
  • ***
  • İleti: 4175
  • Cinsiyet: Bay
Ynt: Delta Pulse 3S
« Yanıtla #9261 : 18 Ocak 2018, 10:12:03 »
LÜZUMSUZ İSE SÖNDÜR...

Delilik, şüphesiz aptallıktan daha iyidir...

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9262 : 18 Ocak 2018, 12:41:04 »
I made these changes and nothing changed

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9263 : 18 Ocak 2018, 22:35:17 »
Note when the power grid of the device works alone without pressing the button of the fallow Is it normal or what?

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9264 : 20 Ocak 2018, 02:01:06 »
???

Çevrimdışı Karadağ

  • Global Moderator
  • General
  • *****
  • İleti: 8470
  • Cinsiyet: Bay
  • R & D ENGINEER
    • TeknolojiEkibi
Ynt: Delta Pulse 3S
« Yanıtla #9265 : 20 Ocak 2018, 10:00:40 »
If you have V6 MCU, you can noy use this PCB.
insanlar sizi eskisi gibi kullanmadıklarında değiştiğinizi söylerler…

Eğer bir aptala laf anlatmaya çalışırsan dışarıdan bakanlar iki aptalın sohbet ettiğini sanırlar.

Kamburlar ülkesinde sırtı düze sakat denir.

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9266 : 21 Ocak 2018, 03:59:42 »
After the trouble of the machine is working now but there is a problem button down as it was pressed remains working alone With the knowledge was separated from the control man Board to make sure there is no error in the board but the button remained working Is the control became corrupted

Çevrimdışı Karadağ

  • Global Moderator
  • General
  • *****
  • İleti: 8470
  • Cinsiyet: Bay
  • R & D ENGINEER
    • TeknolojiEkibi
Ynt: Delta Pulse 3S
« Yanıtla #9267 : 22 Ocak 2018, 12:45:27 »
V6 MCU can not work with old PCB.
insanlar sizi eskisi gibi kullanmadıklarında değiştiğinizi söylerler…

Eğer bir aptala laf anlatmaya çalışırsan dışarıdan bakanlar iki aptalın sohbet ettiğini sanırlar.

Kamburlar ülkesinde sırtı düze sakat denir.

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9268 : 23 Ocak 2018, 02:34:24 »
The device is working now, but IRF is warming up. I used a 2 ohm file and I used a 3.5 ohm file. The same result is very hot irf740

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9269 : 23 Ocak 2018, 02:36:44 »

Çevrimdışı brave

  • Yüzbaşı
  • ***
  • İleti: 164
  • Cinsiyet: Bay
Ynt: Delta Pulse 3S
« Yanıtla #9270 : 24 Ocak 2018, 00:32:40 »
https://f.top4top.net/m_7517ta960.mp4



make sure that quality of copper of coil is good.
and also make sure that your coil is between 370uH and 1mH.
good luck
Do not despair, God is with you

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9271 : 25 Ocak 2018, 12:56:58 »
Thank you brother i used coil 400 uh and used coil 390 uh and used coil 450uh same result irf740 very hot omnia top of 2 ohm

Çevrimdışı brave

  • Yüzbaşı
  • ***
  • İleti: 164
  • Cinsiyet: Bay
Ynt: Delta Pulse 3S
« Yanıtla #9272 : 25 Ocak 2018, 22:55:18 »

Hi حسين
upload photos of your PCB after the changes that you made.

Do not despair, God is with you

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9273 : 25 Ocak 2018, 23:23:46 »
I am currently outside the house when I return I will raise a picture of the board but I followed the modifications that were placed on the picture and put a bridge between two men tagged irf9540 as in the following picture
[/size]
[/size]

Çevrimdışı brave

  • Yüzbaşı
  • ***
  • İleti: 164
  • Cinsiyet: Bay
Ynt: Delta Pulse 3S
« Yanıtla #9274 : 26 Ocak 2018, 11:33:03 »

Hello all
please help me.


I tried run DP3S in first use. I get problems.
1-the screen run directly without clicking any button.
2-IRF740 very hot.
3-I can not get the curve of calibration (TILTING CURVE).


4-when I click the menu button I get this problem in the second video.

Do not despair, God is with you

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9275 : 26 Ocak 2018, 16:01:44 »
My brother the same thing is happening with you gets with me This indicates that the button down remains compressed on it I do not know why you separated the control man responsible for the bottom button and did not solve the important problem I took a bridge from the man control of the man responsible for this button and stopped its work but since the problem exists with you On the same version I have a 3D v6.1 I think the problem is not in control and we hope the brothers solve this problem with the hrf740 hottest problem

Çevrimdışı brave

  • Yüzbaşı
  • ***
  • İleti: 164
  • Cinsiyet: Bay
Ynt: Delta Pulse 3S
« Yanıtla #9276 : 26 Ocak 2018, 16:08:52 »
My brother the same thing is happening with you gets with me This indicates that the button down remains compressed on it I do not know why you separated the control man responsible for the bottom button and did not solve the important problem I took a bridge from the man control of the man responsible for this button and stopped its work but since the problem exists with you On the same version I have a 3D v6.1 I think the problem is not in control and we hope the brothers solve this problem with the hrf740 hottest problem


Did you get the curve of calibration (TILTING CURVE) ?
Do not despair, God is with you

Çevrimdışı حسين رشاد

  • Yüzbaşı
  • ***
  • İleti: 101
  • www.teknolojiekibi.com
Ynt: Delta Pulse 3S
« Yanıtla #9277 : 26 Ocak 2018, 16:13:06 »
No Brother The device works alone when the electricity is connected to the same device as you have

Çevrimdışı brave

  • Yüzbaşı
  • ***
  • İleti: 164
  • Cinsiyet: Bay
Ynt: Delta Pulse 3S
« Yanıtla #9278 : 26 Ocak 2018, 16:19:01 »
Note when the power grid of the device works alone without pressing the button of the fallow Is it normal or what?



So, We have the same problem.
We are waiting for members to enter, to solve the problem.


Do not despair, God is with you

Çevrimdışı brave

  • Yüzbaşı
  • ***
  • İleti: 164
  • Cinsiyet: Bay
Ynt: Delta Pulse 3S
« Yanıtla #9279 : 26 Ocak 2018, 18:40:53 »



photos of my PCB







Do not despair, God is with you